Roll to stack inline with DP8 and WF8

Roll to stack inline with DP8 and WF8

The DP8 dynamic perforation module is the first solution that combines perforation in the vertical and cross directions along with punching – all in one unit. The paper web is pulled in by the web folder WF8 and perforated or creased longitudinally. The edges can be trimmed simultaneously. Paper waste produced during the processing is collected by a funnel and removed by means of an external waste exhauster. After that, the web is plow-folded in the folder and transferred to the cross cutter.

Technical specifications

Max. roll diameter

54" (1370 mm)

Web width

10" – 20.5" (254 – 520 mm)

Production speed

up to 590 ft/min (180 m/min)

Paper weights

Folding: 40 – 130 g/m2
Perforation: 40 – 200 g/m2; Punch: 60 – 120 g/m2; Scoring: 120 – 250 g/m2

Format length

5" – 19" (127 – 482 mm)
Optional up to 30" (B2 format) with LS8-30

Variable chip-out

1/4" – 2" (6.3 – 50 mm)


Dynamic perforation module DP8

workflow image


Web Inspection System

A Web inspection system checks the quality and content of the printed pages. With the WI8 Web Inspection system you can check quality and content of the printing on each page in terms of colors, positions, contours, smearing, jetouts, data validation, etc. It is always possible to update it with new functions and extend it to a complete tracking solution.

Web Cleaning Solutions

The web de-dusting module PEM removes the dust from the paper webs. The PEM has two de-dusting heads for cleaning both sides of the paper web in continuous operation.

Full Bleed products

The combination of longitudinal and cross cut-out (module CS8) allows the user to produce full-bleed products.

Stack & Sheet (Combo delivery)

The Bypass unit allows quick and easy diverting of the output to the inline saddle-stitching system or to the conveyor belt for stacked book blocks.

Stacker LS8-30

Up to 30″ sheet stacks with the LS8-30 Stacker. Also compatible with sheet overpass.